Vintage Air surefit series
Shop our popular vintage air compliant cars
Shop surefit series products below
1955-56 Chevy Complete
96155-PCU
The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit, plus all under-hood components such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware and installation instructions.
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Infinite blower fan speed adjustment
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- Uses your factory system controls with our patented Electronic Cable Converters
- Flat steel firewall cover panel
- Replacement molded glove box (reduced capacity)
NOTES:
1. This kit requires an OEM, deluxe 4-lever control panel (Not included).
2. This kit is designed for the original firewall and dash.
3. This kit includes TiteFit™ refrigerant lines that are routed through the core support, with the drier mounting behind. The kit may be upgraded to include our polished TiteFit™ lines and our popular polished ProLine compressor/alternator bracket.
4. If using a cross flow radiator, see Condenser Kit # 03455-VCC.
5. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
6. When retaining the original 265 or 283 V8 engine, it may be necessary to upgrade the harmonic balancer and pulleys. You will also need to upgrade from the generator to an alternator.
7. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
WARNING: California proposition 65
This kit includes an integrated center vent and plenum for maximum air flow and ease of installation.
96156-PCU
The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit, plus all under-hood components such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware and installation instructions.
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Infinite blower fan speed adjustment
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- Uses your factory system controls with our patented Electronic Cable Converters
- Flat steel firewall cover panel
- Replacement molded glove box (reduced capacity)
NOTES:
1. This kit requires an OEM, deluxe 4-lever control panel (Not included).
2. This kit is designed for the original firewall and dash.
3. This kit includes TiteFit™ refrigerant lines that are routed through the core support, with the drier mounting behind. The kit may be upgraded to include our polished TiteFit™ lines and our popular polished ProLine compressor/alternator bracket.
4. If using a cross flow radiator, see Condenser Kit # 03455-VCC.
5. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
6. When retaining the original 265 or 283 V8 engine, it may be necessary to upgrade the harmonic balancer and pulleys. You will also need to upgrade from the generator to an alternator.
7. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
WARNING: California proposition 65
With no molded center vent, this kit allows the use of 4 individual louver locations.
1957 Chevy Complete Kit
965702
The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Infinite blower fan speed adjustment
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- Uses your factory system controls with our patented Electronic Cable Converters
- Stamped OEM-style firewall cover
- Replacement molded glove box (reduced capacity)
NOTES:
1. This kit requires an OEM, deluxe 4-lever control panel (Not included).
2. This kit is designed for the original firewall and dash.
3. Refrigerant lines are routed through the core support, and the drier mounts behind. These kits may be upgraded to include our popular polished ProLine compressor/alternator bracket.
4. If using a cross flow radiator, see Condenser Kit # 03455-VCC.
5. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
6. When retaining the original 265 or 283 V8 engine, it may be necessary to upgrade the harmonic balancer and pulleys. You will also need to upgrade from the generator to an alternator.
7. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
WARNING: California proposition 65
With no molded center vent, this kit allows the use of 4 individual louver locations.
965701
The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Infinite blower fan speed adjustment
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- Uses your factory system controls with our patented Electronic Cable Converters
- Stamped OEM-style firewall cover
- Replacement molded glove box (reduced capacity)
NOTES:
1. This kit requires an OEM, deluxe 4-lever control panel (Not included).
2. This kit is designed for the original firewall and dash.
3. Refrigerant lines are routed through the core support, and the drier mounts behind. These kits may be upgraded to include our popular polished ProLine compressor/alternator bracket.
4. If using a cross flow radiator, see Condenser Kit # 03455-VCC.
5. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
6. When retaining the original 265 or 283 V8 engine, it may be necessary to upgrade the harmonic balancer and pulleys. You will also need to upgrade from the generator to an alternator.
7. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
WARNING: California proposition 65
This kit includes an integrated center vent and plenum for maximum air flow and ease of installation.
1958-60 Corvette Complete Kit
The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Infinite blower fan speed adjustment
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- New rotary controls included
- Flat steel firewall cover panel
- Replacement molded glove box (reduced capacity)
This kit fits 1958-60 Chevrolet Corvettes. WARNING: California proposition 65
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. For best performance, we recommend using our heavy-duty fan blade and shroud.
3. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
4. SureFit™ systems may interfere with aftermarket windshield wipers.
1961-62 Corvette Complete Kit
The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Infinite blower fan speed adjustment
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- New rotary controls included
- Flat steel firewall cover panel
- Replacement molded glove box (reduced capacity)
This kit fits 1961-62 Chevrolet Corvettes. WARNING: California proposition 65
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. For best performance, we recommend using our heavy-duty fan blade and shroud.
3. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
4. SureFit™ systems may interfere with aftermarket windshield wipers.
5. Driver side coolant expansion tank may need to be relocated. Tank relocation kit (Part # 154730) is available for additional purchase.
1963-65 Corvette Complete Kit
964163
The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Infinite blower fan speed adjustment
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- New rotary controls included
- Flat steel firewall cover panel
- Replacement molded glove box (reduced capacity)
his kit fits 1963-65 Chevrolet Corvette models with factory air. WARNING: California proposition 65
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. For best performance, we recommend using our heavy-duty fan blade and shroud.
3. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
4. On 1963 models, it will be necessary to relocate the alternator to the driver side. A Vintage Air bracket (Part # 148100) is available for separate purchase
961162
The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Infinite blower fan speed adjustment
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- New rotary controls included
- Flat steel firewall cover panel
- Replacement molded glove box (reduced capacity)
This kit fits 1963-65 Chevrolet Corvette models without factory air. WARNING: California proposition 65
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. For best performance, we recommend using our heavy-duty fan blade and shroud.
3. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
1966 Corvette Complete Kit
961163
The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Infinite blower fan speed adjustment
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- New rotary controls included
- Flat steel firewall cover panel
- Replacement molded glove box (reduced capacity)
This kit fits 1966 Chevrolet Corvette models without factory air. WARNING: California proposition 65
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. For best performance, we recommend using our heavy-duty fan blade and shroud.
3. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
964165
The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Infinite blower fan speed adjustment
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- New rotary controls included
- Flat steel firewall cover panel
- Replacement molded glove box (reduced capacity)
This kit fits 1966 Chevrolet Corvette models with factory air. WARNING: California proposition 65
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. For best performance, we recommend using our heavy-duty fan blade and shroud.
3. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
1967 Corvette Complete Kit
The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Infinite blower fan speed adjustment
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- New rotary controls included
- Flat steel firewall cover panel
- Replacement molded glove box (reduced capacity)
This kit fits 1967 Chevrolet Corvette models without factory air. WARNING: California proposition 65
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. For best performance, we recommend using our heavy-duty fan blade and shroud.
3. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
1968 Corvette Complete Kit
964168
The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit, plus all under-hood components such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware and installation instructions.
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Variable speed blower
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- New control panel included
- Flat steel firewall cover panel
This kit fits 1968 Chevrolet Corvette models with factory air.
WARNING: California proposition 65
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. For best performance, we recommend using our heavy-duty fan blade and shroud.
3. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
961174
The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit, plus all under-hood components such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware and installation instructions.
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Variable speed blower
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- New control panel included
- Flat steel firewall cover panel
This kit fits 1968-76 Chevrolet Corvette models without factory air.
WARNING: California proposition 65
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. For best performance, we recommend using our heavy-duty fan blade and shroud.
3. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
1969-73 Corvette Complete Kit
961174
The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit, plus all under-hood components such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware and installation instructions.
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Variable speed blower
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- New control panel included
- Flat steel firewall cover panel
This kit fits 1968-76 Chevrolet Corvette models without factory air.
WARNING: California proposition 65
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. For best performance, we recommend using our heavy-duty fan blade and shroud.
3. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
964173
The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit, plus all under-hood components such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware and installation instructions.
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Variable speed blower
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- New control panel included
- Flat steel firewall cover panel
This kit fits 1969-73 Chevrolet Corvette models with factory air.
WARNING: California proposition 65
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. For best performance, we recommend using our heavy-duty fan blade and shroud.
3. SureFit™ systems may interfere with some OEM radios or in-dash speakers..
1974-76 Corvette Complete Kit
964174
The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit, plus all under-hood components such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware and installation instructions.
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Variable speed blower
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- New control panel included
- Flat steel firewall cover panel
This kit fits 1974-76 Chevrolet Corvette models with factory air.
WARNING: California proposition 65
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. For best performance, we recommend using our heavy-duty fan blade and shroud.
3. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
961174
The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit, plus all under-hood components such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware and installation instructions.
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite just-right-temperature air blending
- Variable speed blower
- High-volume dehumidified defrost mode
- Separate high-capacity aluminum plate & fin cooling coil
- Copper/brass CuproBraze™ parallel-flow heater coil
- Mounts behind the dash
- New control panel included
- Flat steel firewall cover panel
This kit fits 1968-76 Chevrolet Corvette models without factory air.
WARNING: California proposition 65
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. For best performance, we recommend using our heavy-duty fan blade and shroud.
3. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
1967-68 Camaro Complete Kit
961244
The Gen 5 is Vintage Air's most powerful and intelligent climate control system. The Gen 5 uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit, plus all under-hood components such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware and installation instructions.
- Engineered to cool your vehicle faster than ever
- Improved diagnostics and advanced systematic fail safes
- Multiple mounting options for an easier installation
- Rubber well-nut mounting points for improved NVH isolation
- Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment
- OEM block-type expansion valve
- Injection molded case for optimal precision, strength and quality
- Injection molded blend air doors with integral rubber seals
- Removable access covers for coil service
- Interchangeable defrost and floor heat plenums for increased mounting flexibility
- Powder coated steel mounting brackets
- Quiet high-performance blower
- Uses your factory system controls with our patented Electronic Cable Converters
This kit fits 1967-68 Camaro/Firebird models without factory air.
WARNING: California proposition 65
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. We recommend using our heavy-duty fan blade and shroud.
3. SureFit™ systems may interfere with some OEM radios or in-dash speakers
964244
The Gen 5 is Vintage Air's most powerful and intelligent climate control system. The Gen 5 uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit, plus all under-hood components such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware and installation instructions.
- Engineered to cool your vehicle faster than ever
- Improved diagnostics and advanced systematic fail safes
- Multiple mounting options for an easier installation
- Rubber well-nut mounting points for improved NVH isolation
- Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment
- OEM block-type expansion valve
- Injection molded case for optimal precision, strength and quality
- Injection molded blend air doors with integral rubber seals
- Removable access covers for coil service
- Interchangeable defrost and floor heat plenums for increased mounting flexibility
- Powder coated steel mounting brackets
- Quiet high-performance blower
- Uses your factory system controls with our patented Electronic Cable Converters
This kit fits 1967-68 Camaro/Firebird models with factory air.
WARNING: California proposition 65
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. We recommend using our heavy-duty fan blade and shroud.
3. SureFit™ systems may interfere with some OEM radios or in-dash speakers
1969 Camaro Complete Kit
961245
The Gen 5 is Vintage Air's most powerful and intelligent climate control system. The Gen 5 uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit, plus all under-hood components such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware and installation instructions.
- Engineered to cool your vehicle faster than ever
- Improved diagnostics and advanced systematic fail safes
- Multiple mounting options for an easier installation
- Rubber well-nut mounting points for improved NVH isolation
- Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment
- OEM block-type expansion valve
- Injection molded case for optimal precision, strength and quality
- Injection molded blend air doors with integral rubber seals
- Removable access covers for coil service
- Interchangeable defrost and floor heat plenums for increased mounting flexibility
- Powder coated steel mounting brackets
- Quiet high-performance blower
- Uses your factory system controls with our patented Electronic Cable Converters
This kit fits 1969 Camaro models without factory air.
WARNING: California proposition 65
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. We recommend using our heavy-duty fan blade and shroud.
3. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
964245
The Gen 5 is Vintage Air's most powerful and intelligent climate control system. The Gen 5 uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.
Additional features include variable blower speed and dash/floor/defrost blend.
**Complete kits include everything in the evaporator kit, plus all under-hood components such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware and installation instructions.
- Engineered to cool your vehicle faster than ever
- Improved diagnostics and advanced systematic fail safes
- Multiple mounting options for an easier installation
- Rubber well-nut mounting points for improved NVH isolation
- Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment
- OEM block-type expansion valve
- Injection molded case for optimal precision, strength and quality
- Injection molded blend air doors with integral rubber seals
- Removable access covers for coil service
- Interchangeable defrost and floor heat plenums for increased mounting flexibility
- Powder coated steel mounting brackets
- Quiet high-performance blower
- Uses your factory system controls with our patented Electronic Cable Converters
This kit fits 1969 Camaro models with factory air.
WARNING: California proposition 65
NOTES:
1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
2. We recommend using our heavy-duty fan blade and shroud.
3. SureFit™ systems may interfere with some OEM radios or in-dash speakers.